All times are UTC - 5 hours [ DST ]

Post new topic Reply to topic  [ 7 posts ] 
Author Message
Offline
 Post subject: New build in process.
PostPosted: Mon Sep 18, 2017 1:55 pm 

Rank: Newbville
Posts: 1
Hey guys.

My name is John I live in Ronkonkoma Ny and I'm doing a turbo swap on my 95 manual 7 bolt 4g64 mighty max. I also have a galant Gsx I converted to a 5 speed powered by a 2.1l turbo engine I built and tuned.

So far the truck received all new suspension bushings Shocks tie rods. I shortened the front springs and I changed out the rear shackles with leaf spring sliders. 1g eclipse seats have been mounted in the place of the bench and a ford 8.8 is shortened and all mocked up ready to weld in. I am going to be adding a drift brake and change out the proportion valve for an adjustable one.

I ran in to a snag with my drive shaft. The shop I brought it to said they couldn't lengthen it because it was tapered. I needed about an inch added along with a yoke for a ford u-joint. So looking at the cost of a whole new drive shaft I decided now was the time to move my engine forward.

I have collected a wide variety of parts over the years. In my position is a station transmission and a wide block g63b. I have a fresh built 1g head with ss valves and upgraded springs and retainers that is ported. A crappy smim with square tube runners. I also have a 2g head that I ported in need of a valve job and an evo 8 intake manifold.

My current plan is to move the engine foward 2", put NPR pistons in the 2.0 block with the 6 bolt head. Unless I can just put the dohc head on the 4g64 currently in the truck. I can't find anyone to confirm valve clearing by the stock mighty max pistons. That way I could mod the head to use a front water exit and front mount can and crank sensors.

Well, hope to get some insight. Thanks for reading.


Mon Sep 18, 2017 11:19 am
 Profile  
 
Offline
 Post subject: Re: New build in process.
PostPosted: Tue Sep 19, 2017 7:44 am 
User avatar

Posts: 509
Location: wv
Welcome! Hope to see pics of this!

_________________
Jonathan

89 mighty max -4g swap in progress
04 F150 daily driver / gas hog :-/


Mon Dec 31, 2012 8:47 pm
 Profile  
 
Offline
 Post subject: Re: New build in process.
PostPosted: Tue Sep 19, 2017 9:21 pm 
User avatar

Rank: Site Admin
Posts: 7744
Location: MA
Welcome ! Nice build! We need pics now. I personally think you can put a dsm head on a mightymax, but I never see anybody do it. You definitely should!! I think you will need NT galant timing gears.

_________________
Jeremy N.
1964 Impala Convertible
1972 Pontiac Lemans
2016 Subaru Impreza


Sat Mar 18, 2006 7:40 am
 Profile  
 
Offline
 Post subject: Re: New build in process.
PostPosted: Sat Sep 23, 2017 8:51 pm 
User avatar

Rank: HRCS OG
Posts: 3695
Location: Central NY
DOHC swap is 100% doable, may need adjustable cam gears. IIRC the projectzerog site has the information on the swap, as well as the parts list.

_________________
Walt
04 RX-8 Touring Rebuild!
91 3000GT VR4
01 Tibb
Some people never have anything except ideas. Go do it.
Emissions & fuel economy haven't exactly been areas of strength for past rotary power plants, but absolutely no one with a soul has ever cared.


Wed Jun 24, 2009 12:21 am
 Profile  
 
Offline
 Post subject: Re: New build in process.
PostPosted: Wed Nov 08, 2017 4:34 am 

Rank: Newbville
Posts: 16
Location: Tampa, Florida
Hi, John! I can't wait to see this. :)


Thu Nov 02, 2017 7:39 am
 Profile  
 
Offline
 Post subject: Re: New build in process.
PostPosted: Wed Dec 20, 2017 1:30 am 
User avatar

Rank: Moderator
Posts: 5703
Location: Boerne, TX
Welcome!

_________________
-Ryan
1989 R32.4 Nissan Skyline GTS-T 4dr Ls/turbo/6spd
1999 Ford F350 7.3l diesel
1971 Dodge Demon
02 Montero full size
1995 s14.5 rhd 240sx 1jz gt35 w58
1 rhd s13 4 regular s13
02 330ci
64 barracuda


Sun Nov 01, 2009 8:39 pm
 Profile  
 
Offline
 Post subject: Re: New build in process.
PostPosted: Mon Jan 15, 2018 1:18 am 
User avatar

Rank: Newbville
Posts: 11
Location: Wichita, KS
Hell yeah! Love swapped Mighty Max or D-50 trucks.

_________________
-Ed

1993 Eagle Talon TSi/AWD
1998 Eagle Talon Tsi/AWD
2006 Mitsubishi Raider DuroCross V8 Pickup


Mon Oct 16, 2017 8:30 pm
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Style by mindfreak.ro Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group