Page 4 of 4

Re:

Posted: Wed Jun 27, 2012 8:33 pm
by Gentleman Rogue
4g63mightymax wrote:Here is what a stock V6 Ram 50 clutch pedal looks like for reference.

These pics are also of a stock hydraulic pedal.
Image
Image
i found a couple mid 90's Mazdas and Rangers in a local yard; and the mounting on their clutch pedal brackets looks very similar to the V6 Ram50 ones; but the actually pedal looks much shorter, and doesnt jog over the to right quite as much. i would probably get one and modify it, but if i'm going to have to modify the mounting and pedal anyway, this is looking more and more plausible:

Image

$60 from Jegs, looks super simple and sturdy. it's looking like i might go this route; i'm going out to measure right now. stay tuned.

Re: Hydraulic Clutch Swap Info

Posted: Wed Jun 27, 2012 9:19 pm
by 4g63mightymax
You may also want to check out 2G DSM pedals. I have a odd feeling that they are strangely similar to the MM Ram 50's, though I'm not sure why.

Re: Hydraulic Clutch Swap Info

Posted: Fri Sep 21, 2012 3:51 pm
by DroppedMitsu
Hey Jeremy what t.o.b. are you using with your hydro swap? It isn't listed anywhere that I saw.

Re: Hydraulic Clutch Swap Info

Posted: Fri Sep 21, 2012 7:12 pm
by 4g63mightymax
Good question. I honestly don't remember if it's a DSM piece or the stock one from the truck. They may actually be the same part. If I had to pick, I would say I'm 65% sure it is the stock one for the truck. :)

Re: Hydraulic Clutch Swap Info

Posted: Mon Jan 06, 2020 7:40 pm
by Hickory-NC-2Ggsx
Hello all im new and super stoked to be on the forum! Has any one found out if any other clutch pedals fit?

Re: Hydraulic Clutch Swap Info

Posted: Tue Jan 07, 2020 12:49 pm
by 4g63mightymax
I haven't had one of these trucks in quite a while, so I haven't kept up on this topic. I always had good luck wandering junkyards and finding stuff I needed though. Look for similar era cars/trucks and see what looks similar. Interestingly, I recently used factory mightymax pedals in a 72 Nova. They fit surprisingly well.

Re: Hydraulic Clutch Swap Info

Posted: Wed Jan 08, 2020 12:17 am
by Hickory-NC-2Ggsx
Oh okay, well i found a set of pedals today for 50$. So ill pick those up in a few days. Im trying to get all the parts together that i need to do a 2.4 dohc with a hydraulic clutch. So that way i can do everything at once. I was going to keep the cable but after ready everything about your old truck I'm just going to go ahead and do it right. Lol

Re: Hydraulic Clutch Swap Info

Posted: Wed Jan 08, 2020 9:25 am
by 4g63mightymax
The hydraulic clutch swap was well worth the effort. The cable clutch setup was barely usable.

Re: Hydraulic Clutch Swap Info

Posted: Sun Jan 12, 2020 5:58 pm
by 300D50
I'd almost recommend a hydraulic throwout bearing for the transmission, since it wouldn't require the cutouts.